1.Brief Introduction
The metallic waste can be produced in nuclear running inevitably. An amount of fume and smoke may release when cutting metallic waste. Such fume pollutes work environment seriously. Especially for cutting metal polluted radioactivity, the harm is worse.
Fume purifier is aim to provide safety, high efficiency purification method for cutting waste metal material in nuclear industry. When operation, fume caused by cutting metal will enter into purifier from suction arm under negative pressure. The larger particle is held on inertia separator, fine particle will be retained on medium & heap filter. Finally, discharge air can meet nuclear safety emission standard.
2. Performance and Index
Air Flow:2200m³/h
Power:3.0KW
Voltage :380V, 3phase,50Hz
Max negative pressure:2800Pa
Filter level: level III
Inertia separator+ medium filter+ heap filter
Medium Filter:
Filter class:≥F7(80≤Em<90,EN779:2002)
Hepa Filter:
Filter Class: ≥ H13(99.95%,EN1822:2009)
Noise:≤75dB
Dimension:800x800x1640mm
Weight:270Kg
3.Characteristic :
Air suction arm, remove to any work place easily.
Centrifuge fan with large air flow capacity, outlet silencer, reduce noise effectively.
Stable sealing for housing, stable negative pressure inner
Level I inertia separator and level II filter, dust collection performance perfect
Easily for installation, disassembly and packing (plastic bag packing )
Indicator light show working status
Indicate filter pressure drop to guide operator know filter service cycle.
Hot protection for electricity, guarantee electrical control system